powatec dpf / cat cleaner + feed pipe

DPF/Catalyst Cleaner dissolves and removes all contamination and soot residues from the particulate filter and the catalyst – no disassembling required. Restores the complete function of the diesel particulate filter and catalyst. This product is also ideal for EGR-valve cleaning.

• Dissolves and removes contamination
• Cleans without dismantling
• Evaporates residue-free

Directions
Shake the can well before use! (Approx. 1 min)

Dismantle the temperature, pressure sensor or access port on the DPF / catalyst and insert the probe through the opening. Spray the cleaner with the probe inserted into the particulate filter/catalyst in 5-second intervals until the DPF / catalyst is proper filled with the foam. Close the opening after application. When the cleaner has been applied the deposits are released and dispersed in the particulate filter / catalyst. During the normal drive operation the micro-fine dirt particles combust.

Restart the regeneration process through a workshop tester. Finally remove the faulty memory entry or delete existing errors.

Afterwards perform a test drive consisting of about 20 minutes.

DPF / Catalyst Cleaner is usable for all closed particulate filter systems. Check the oil level before cleaning. Oil change is necessary if oil dilution is performed with diesel.