VALEO - Rear Beep And Park Kit

Valeo beep&park™ 632200 is a parking assistance product featuring 4 sensors that can be used for fitting on the front or rear of your vehicle, with 1 loud speaker to alert the driver to obstacles.

Specification

• Detection sensors

  The system features 4 front or rear ultrasonic sensors for consistent detection.
  If the sensors are fitted to the rear, then they are activated as soon as the reverse gear is engaged.
  If the sensors are fitted to the front, when the vehicle starts, they are activated, for 30 seconds at the start, and they remain active for 8 to 20 seconds each time the brake pedal is released (depending on the chosen setting)

• How it works?
  Obstacles in front of or behind the vehicle (other vehicles, posts, pedestrians, etc) are detected and announced by a sound signal PureSound alarm

  The audible alarm gradually intensifies. It is intermittent at first and becomes continuous when the vehicle is within 30 cm of the obstacle.
  The system detects obstacles located between 10cm and 170cm from the vehicle.

• A diagnostic function      

  The system automatically detects defective or badly fixed sensor
  The speaker warns the driver when a sensor is malfunctioning.