STANDARD - Eolys Fluid - 1lt+ Kit

PatFluid® is a universal aftermarket replacement for all four generations of on-board Diesel Particulate Filter (DPF) additives, also known as Fuel Borne Catalysts (FBC). It is a cost-effective & reliable product that aids the regeneration of particulate filters fitted on diesel passenger cars and vans.

Since 2000 many European passenger car manufacturers have used Diesel Particulate Filters on their diesel vehicles and this has since become mandatory by law. Some manufacturers opted to use Fuel Borne Catalysts to aid the operation of these filters. A Fuel Borne Catalyst is a fuel additive that aids DPF regeneration and reduces emissions. The additive is contained in a small tank or bag on the vehicle and is automatically dosed into the main fuel tank. When the additive runs low it needs to be replenished to ensure the DPF operates correctly, some vehicles have a plastic tank that needs to be refilled, some have flexible bags that are replaced.

PatFluid lowers the combustion temperature of soot trapped in the filter so that it can be burnt off at temperatures seen during normal driving conditions; this allows for trouble-free vehicle operation - with rapid and complete DPF regenerations. If the tank is not refilled, or if lower quality or unsuitable additives are used, this can risk DPF blockage, damage or other issues for the vehicle, all leading to high repair and operation costs for the vehicle owner.”

Features & Benefits

Universal alternative DPF additive to refill all four generations of passenger car & van on-board dosing systems.
Cost-effective & highly reliable.
No requirement to drain on-board tank before refilling.
Compatibility with original equipment additives tested.
Matching active catalyst content to the leading generation of OEM additives.
Bag product range available for vehicles with flexible bag system.
 

Trustworthy Formulation

PatFluid has been supplied as a robust, cost-effective solution to the aftermarket for over twelve years. It can be trusted as a replacement for all four generations of OEM on-board FBC additives.

Unlike some after-market products that use low levels of active catalyst material, PatFluid® uses the same amount as the leading Generation of OEM additive.

Easy-to-Use Universal Transfer Kit

To refill the vehicle’s additive tank a kit with connectors is required. We supply our PatFluid Transfer Kit to refill all vehicle makes/models with on-board FBC dosing tank units.

Dependent on vehicle make/model, the tank typically requires refilling one to three times during the vehicle’s life and the reservoirs vary from between one litre to five litres in capacity. Tank reservoirs are readily accessed close to the fuel tank.

After refilling the tank, the vehicle will need to have the additive counter reset. To do this the ECU must be accessed with the correct equipment/software.