JBM - Nail Gun – with Storage Case

This tool is designed for tacking of cardboard, insulating material, fabric, foils, leather and similar materials on surfaces of wood or wood-like materials.

It comes equipped with a LED light to indicate the status of the power tool, a LED light for an enhanced visibility during operation, a drive shift knob to select between the single and contact firing mode for a more precise or quick firing, and a depth adjustment wheel to set the nail/staple heads firing depth as desired. It also features a belt hook and soft grip handle.

Besides, it comes equipped with a safety contact pin, which needs to be pressed against the workpiece before the trigger switch is squeezed to fire nails/staples under the single firing mode, thus, working as a security mechanism to avoid an accidental starting of the tool.

TECHNICAL SPECIFICATIONS:
- Average firing speed: 60 nails/staples per min.
- Max. firing speed: 100 nails/staples per min.
- Max. magazine capacity: holds up to 100 nails/staples.
- Max. length of nails: 20-50mm (18 Gauge Brad Nails).
- Max. length of staples: 40mm (18 Gauge narrow crown light duty staples).
- Max. nail cross section width: 1.25mm.
- Max. nail cross section thickness: 1.05mm.
- Staple length: 19-40mm.
- Max. staples crown: 6mm.
- Max. staple cross section width: 1.2mm.
- Max. staple cross section thickness: 1mm.
- 2Ah battery – 420 staples/nails per charge.
- 4Ah battery – 800 staples/nails per charge.
- 6Ah battery – 1200 staples/nails per charge.
- LED red on = Battery is low.
- LED red flashing = The nails/staples are jammed.
- LED green on = There are no nails in the magazine, the power tool is in dry fire protection.
- LED green flashing = Overheat, the power tool is in overheat protection.